Over the years, the evolution of automotive lighting has mirrored not only technological advancements but also the shifting landscape of consumer demands, design aesthetics, and regulatory mandates, culminating in a rich historical trajectory. Examining this path unveils how innovation, functionality, and safety considerations have collectively influenced the development of the vehicles navigating our modern roads.
Carbide Lamps : Automotive lighting originated with the utilization of acetylene or carbide lamps. Formed by the reaction of calcium carbide with water, these lamps generated light by igniting acetylene gas. Due to susceptibility to wind disturbances and inconsistent light intensity, acetylene or carbide lamps were burdensome, necessitating frequent maintenance despite their effectiveness.
Electric Bulbs : With the tungsten filament bulb becoming a staple for many decades, the 1910s marked the transition to electric headlamps. In terms of reliability, brightness, and ease of use, these bulbs marked a necessary improvement over carbide lamps.
Halogen Lamps : Halogen lamps, introduced during the 1960s, offered heightened brightness and durability in comparison to regular tungsten bulbs. Utilizing a tungsten filament enclosed within a compact quartz envelope saturated with halogen gas, these lamps facilitated higher temperature operation for the filament.
High-Intensity Discharge (HID) Lamps : Particularly in luxury cars, HID or xenon lamps started becoming popular by the late 20th century. Light emission occurs through the generation of an electric arc between two electrodes placed within a quartz tube containing xenon gas and metal salts. While high-intensity discharge (HID) lights offer superior efficiency and brightness compared to halogens, their adoption entails a higher cost.
LED Lights : In automotive applications, the 21st century saw the emergence of Light Emitting Diodes (LEDs). Among its benefits, LEDs boast a diminished energy usage, extended lifespan, and the versatility to be shaped into diverse forms, enabling creative and adaptable vehicle designs.
Evolution of Standards : The need for standardized lighting became noticeable to ensure safety as automobiles became commonplace. To dictate the color, intensity, and positioning of vehicle lights, countries started preparing regulations.
The Role of Safety Agencies : In shaping automotive lighting regulations, agencies like the Economic Commission for Europe (ECE) in Europe, and the National Highway Traffic Safety Administration (NHTSA) played crucial roles over time. Frequently, their directives originated from investigations into the causes of accidents and the significance of lighting in averting collisions.
Innovations and Regulations : The evolution of automotive lighting, propelled by innovation, encountered varying degrees of acceptance from regulatory bodies. An illustration of this is the swiveling headlights, designed to move with the steering to illuminate curves, which encountered regulatory obstacles in the US, many years prior to receiving approval.
Consistency Across Geographies : Due to inconsistent regulations across countries, manufacturers frequently produce various lighting systems for different markets. Continued efforts are being made to align these regulations, with entities such as the World Forum for Harmonization of Vehicle Regulations dedicated to advancing global standardization.
In the realm of automotive technology, the evolution of lighting mirrors a larger dynamic: an ongoing tug-of-war between innovation and regulation, with the shared goal of enhancing safety and efficiency on the roads. Following this introduction, subsequent sections will explore in detail the complexities and advancements within both external and internal lighting systems.
ARTICLE
USING A SMART IDEAL DIODE FOR CAR BATTERY FRONT-END PROTECTIONARTICLE If the battery terminals in a car are reverse-connected during a jump start, vehicle maintenance, or repair, the components in the electronics control unit (ECU) may be damaged if they cannot handle this fault condition. On top of this, during normal operation the car battery voltage is not constant — the input voltage (VIN) can even be negative under several transient tests regulated by the EMC s.
WEBINAR: ENSURING SAFETY FOR AUTONOMOUS VEHICLES WITH ADVANCED VOLTAGE SUPERVISIONVIDEO As autonomous vehicles around the world progress in automation levels, improvements to advanced driver-assistance systems (ADAS) sensors and high-performance computers (HPCs) to fuse data from these sensors are necessary. In addition, safety and reliability in these systems cannot be compromised. Advanced voltage supervisors that monitor system voltages and noise are necessary to help meet the fun.
VIDEO
WEBINAR - DRIVING EFFICIENCY: IDEAL DIODE CONTROLLERS IN AUTOMOTIVE SYSTEMSVIDEO An MPS ideal diode controller offers a versatile solution that can substitute a power diode or an unregulated P-channel MOSFET rectifier with a regulated N-channel MOSFET. This substitution results in reduced power loss and temperature. These controllers are proficient in rectifying alternating voltages up to 100kHz, which makes them well-suited to rectify power in diverse applications, such as fa.
ARTICLE
SWITCH-NODE WAVEFORM DEFINES EMC CHARACTERISTICS FOR STEP-DOWN CONVERTERSARTICLE Step-down converters’ switch-node voltage waveform defines the electromagnetic compatibility (EMC) behavior for automotive CISPR 25 Class 5 measurements. The ringing frequency in the switch-node waveform is an important signal on the EMC receiver, where a higher ringing amplitude on the switch node often causes EMC issues. Understanding the switch-node waveform enables predicting the converter’s E.
VIDEO
HIGHLY INTEGRATED H-BRIDGE DC MOTOR DRIVER IC: MP6615 & MPQ6615-AEC1VIDEO Learn more about MPS's innovative H-bridge motor driver ICs, the MP6615 and AEC-Q100 qualified MPQ6615, designed for optimal performance in brushed DC motor applications. Housed in a compact TQFN-26 (6mmx6mm) package, these drivers boast a wide 4.75V to 40V input range, providing up to 8A of continuous output. With integrated pre-drivers, gate driver power supplies, and bidirectional current-sense.
VIDEO
FROM COLD CRANK TO LOAD DUMP: A PRIMER ON AUTOMOTIVE TRANSIENTSVIDEO Modern vehicles often have complex electronics systems, which increases the challenge for power supply designers when facing harsh, dynamic transient environments such as cold crank, warm crank, reverse battery, and load dump. MPS’s automotive-grade solutions — such as the MPQ8875A, MPQ5850, and MPQ4316 — offer a wide input voltage range and robust protection features to ensure safe, consistent pe.
ARTICLE
SELECTING THE SWITCHING FREQUENCY IN AUTOMOTIVE APPLICATIONSARTICLE This article will discuss the key factors in the energy conversion process, then analyze automotive applications at three switching frequency (fSW) levels: 2MHz, 100kHz, and 500kHz. In a buck circuit, the energy conversion process includes the input capacitance (CIN), output capacitance (COUT), the energy stored in the inductor, and fSW. fSW can impact the following factors: device size, effici.
REFERENCE DESIGN
MPSAFETM POWER SUBSYSTEM SOLUTION FOR MOBILEYE’S EYEQ6L PLATFORMREFERENCE DESIGN The EVME6L_00A is an MPSafeTM power subsystem solution for powering Mobileye’s EyeQ6L platform, enabling autonomous driving in automobiles. The solution provides excellent power delivery with high-efficiency switching regulators. The control architectures of these power converters also allow the system to achieve fast and excellent transient response to load transients without increasing the outp.
VIDEO
EMC LABS: EMI TESTING AND KEY PRINCIPLESVIDEO This tech talk provides an introduction to the most important elements of EMC testing and an overview of MPS's state-of-the-art EMC labs. Jan Spindler, the head of MPS's EMC lab in Ettenheim, Germany, details testing methods, types of EMC chambers, MPS EMC Lab capabilities and locations, and our approach to EMC testing. Watch the full video to learn why EMI is important, how to plan for EMC testin.
MPS DRIVING INNOVATION IN AUTOMOTIVE SOCSVIDEO Watch this tech talk to learn more about powering SoCs in automotive applications. Our expert walks you through the market trends driving the demand for automotive SoCs, automotive computing architecture, solving challenges in core power applications, and more. MPS provides engineering and design support through our EMC and EMI testing laboratories, and our MPSafeTM automotive-grade solutions. MPS.
VIDEO
ADVANTAGES OF MONOLITHIC DRMOS POWER STAGES IN AUTOMOTIVE SOCSVIDEO Dive into the transformative role of monolithic DrMOS power stages in the automotive industry's shift towards autonomous and connected vehicles. This paradigm shift is a challenge and opportunity for OEMs, tier 1s, and component suppliers across the board. These new architectures require powerful SoCs, which in turn require complex power management solutions, specifically for the SoC core rails. L.
APPLICATION NOTE
AN185 - MPQ5850: 36V, SMART DIODE CONTROLLER WITH REVERSE PROTECTION, AEC-Q100APPLICATION NOTE The MPQ5850 is a 36V, smart diode controller with reverse polarity protection designed for automotive applications. The device can rectify alternating voltages up to 100kHz. For example, the MPQ5850 can rectify alternating voltages for a faulty automotive alternator or DC switching power supply. In switching applications (e.g. O-rings), the MPQ5850 prevents negative currents from flowing back th.
From ensuring the driver has clear visibility under varying conditions to communicating the vehicle’s intentions and status to other road users, external lighting in vehicles acts for multiple purposes. Over the years, these lighting systems have been shaped by technological progress and evolving aesthetic preferences, regulatory criteria, and a growing emphasis on safety.
Fundamentals : During nighttime and in poor visibility conditions, headlights are the main source of forward illumination. There are two primary settings available: high beam and low beam.
High Beam : High beams, emitting a focused, intense light, illuminate an extended distance ahead, crucial for regions with minimal ambient lighting. Nevertheless, their brightness can cause glare for approaching drivers, leading to limitations on their usage in traffic situations.
Low Beam : To avert blinding oncoming traffic, low beam offers a more diffused light, directed downwards and to the side. Low beams are designed in such a way that they illuminate the road in front of the vehicle and the periphery without causing glare.
Tail Lights : Tail lights are red in color, placed at the rear and always on when the headlights are activated. They are useful in notifying other drivers about the vehicle’s size and its presence.
Brake Lights : Brake lights turn on when the driver applies the brake, signaling to following drivers that the vehicle is slowing down or coming to a stop. These are also red in color but brighter than the tail lights.
Turn Signals : These blinking lights (front and rear) are usually amber in color and indicate the vehicle’s intention to make a turn or lane change.
Purpose and Design : Forward-facing, low-intensity lights known as DRLs remain on throughout the daytime. Designed primarily to enhance the vehicle's visibility during daylight hours, DRLs aim to decrease the chances of daytime accidents.
Regulatory Perspective : Provided the evidence of DRLs role in increasing road safety, many countries have made DRLs compulsory. Yet, across different jurisdictions, the specifications and intensity of DRLs may vary.
Design and Functionality : Intended for enhancing visibility in foggy environments, fog lights are typically situated lower on the vehicle, often below the bumper, emitting a broad, horizontally spread pattern of light. Such a design guarantees that the light does not reflect off the fog, thus preventing glare for the driver.
Usage Considerations : While essential during foggy conditions, it is crucial to use fog lights with discretion. They can dazzle other road users in clear conditions. Regulations in certain areas dictate the proper usage of fog lights.
Conclusively, to fulfill the aesthetics, safety, and functionality demands, external lighting systems have evolved over the years. To further enhance safety, intelligent systems that can adapt lighting based on driving conditions are now incorporated in modern vehicles. In the subsequent sections, we will explore these advancements and the complex world of internal vehicle illumination.
External lighting systems prioritize visibility and communication with external entities such as other drivers and pedestrians. Conversely, internal lighting aims to deliver enhanced aesthetic appeal, comfort, and convey crucial information within the vehicle's interior. As technology and design philosophies have progressed over time, internal lighting systems have evolved into more sophisticated entities, fulfilling both functional and decorative purposes.
Purpose and Essentials : The primary interface between the driver and the vehicle’s systems is the dashboard, or instrument panel. To access crucial information, particularly in situations of low light, the presence of illumination in this context is essential for the driver. Fuel gauge, tachometer, speedometer, and various warning lights are included as a key indicator.
Design Considerations : Utilizing LED or electroluminescent technology, modern dashboard lighting offers clear visibility, long-lasting performance, and energy-efficient operation. Typically, soft blues, greens, or whites are selected as the color options to reduce eye strain.
Variable Illumination : Variable dashboard illumination is a common feature found in numerous modern vehicles. Using this feature, drivers can customize the brightness level according to their preference, thereby ensuring both comfort and clarity.
Overview : Cabin lighting contributes necessarily to the ambiance and aesthetic appeal of the vehicle’s interior beyond its primary function of illumination.
Types and Placement :
Mood Lighting : In certain luxury vehicles, mood lighting choices are available, enabling drivers or passengers to alter the internal lighting color to suit their preferences, thereby enhancing the overall driving experience.
Functionality : Especially under low ambient light conditions, cargo area lights offer illumination for loading or unloading goods and located in the trunk or cargo area of the vehicle.
Design Aspects : Designed for their particular function, these lights are engineered to be both bright and possess a broad angle of dispersion. When the trunk and rear door are open, these lights are automatically switched on and turn off when closed to save energy.
Although internal lighting may seem a minor element in the broad spectrum of vehicle design, still it acts as a critical contributor to improving the driving experience by ensuring safety and offering important information to the driver. With the progression of technologies, we can expect the emergence of even more inventive approaches to internal lighting, seamlessly blending functionality with aesthetics.
Automotive lighting has undergone evolution not solely concerning the light source, but also in terms of how the light is dispersed and utilized. With technological advancements, contemporary vehicles are integrating sophisticated adaptive and intelligent lighting systems, aimed at enhancing driver visibility, safety, and elevating the overall driving experience. Let’s explore more about these systems:
Concept : In response to vehicle load, speed, and steering angle, the Adaptive Front-lighting System is designed to adjust the direction and range of the headlight beams. Especially in winding or varying terrain, this enables optimal illumination of the road ahead.
Figure 1: Working of AFS System
Functionality : Sensors detect the vehicle speed, steering angle, and yaw rate when a vehicle makes a turn. To better illuminate the road’s curve, the AFS then adjusts the headlamp’s projection angle. Especially during nighttime driving on winding roads, this is useful.
Benefits : AFS decreases the risk of blinding oncoming drivers and expands the driver’s visibility around bends by dynamically adjusting the beam direction which ultimately contributes to a safer driving experience.
Purpose : Based on the surrounding lighting conditions and traffic, this system automates the switching between high and low beams.
How It Works : The system detects vehicles from behind, oncoming vehicles, or sufficient ambient light using cameras and sensors. To prevent dazzling other road users, it will automatically shift to a low beam upon detection and revert to a high beam when the coast is clear.
Safety Implications : This system expands the visibility for drivers without compromising the safety of other road users by ensuring the optimal use of high beams.
Design Philosophy : In creating the desired ambiance inside a vehicle, lighting also plays a significant role beyond its operational purpose. The main objective of ambient interior lighting is to elevate the aesthetic appeal and comfort within a vehicle's cabin.
Features : LED lights, which can be customized in terms of color and intensity, are typically used in this system. Footwells, cup holders, door handles, and center consoles are included in common areas of ambient lighting.
User Experience : Drivers can set the mood of the cabin to their preference with the ability to customize. Pre-set modes such as 'relax' or 'energetic, are provided in some vehicles, which automatically adjust the lighting color and intensity to correspond with the chosen mode.
The role of adaptive and intelligent lighting systems becomes ever more critical as vehicles continue to incorporate more advanced technologies. While these systems primarily aim to enhance the driving experience, their fundamental purpose lies in ensuring safety by providing optimal visibility for the driver while reducing disruptions for other road users. The future of automotive lighting is epitomized by the seamless integration of functionality, safety, and aesthetics within these systems.
Beyond their roles as aesthetic and functional elements, automotive lighting systems play a critical role in ensuring the safety of both the driver and other road users. Enhancing visibility, signaling intentions to other drivers, and ensuring the vehicle's visibility in all driving conditions constitute the primary functions of automotive lighting. Let’s explore the safety and visibility parameters linked with vehicle lighting.
Enhanced Visibility : A driver’s visibility during nighttime or adverse weather conditions can significantly improve by properly functioning and correctly aligned headlights. Automotive lighting serves not only the purpose of illuminating obstacles and the road ahead but also enables drivers to detect and interpret road signs, markings, and potential hazards promptly, allowing for timely reactions.
Reducing Fatigue : Eye strain can be reduced by continuous and adequate illumination. Accelerating the onset of visual fatigue, inadequate lighting can lead to squinting and frequent adjustments of focus. Effective lighting, particularly on extended nighttime journeys, can postpone the onset of fatigue, thereby offering a driving experience that is both safer and more comfortable.
Purpose : To ensure uniformity, adequacy of illumination, and to avert the blinding of oncoming drivers, lighting regulations are made.
Standardization : Standards established by organizations like the United Nations Economic Commission for Europe (UNECE) and the Federal Motor Vehicle Safety Standards (FMVSS) in the U.S. outline specific criteria for vehicle lighting, encompassing factors such as position, color, brightness, and operational capabilities.
Differing Regulations : It's important to recognize that lighting regulations can vary from one country to another. For example, regarding the brightness and color temperature of headlights, the U.S. and Europe have different standards.
Along with compromising aesthetics, faults in the lighting system can hugely impact safety. To identify and notify the driver of any anomalies in the lighting systems, modern vehicles are equipped with diagnostic systems.
The necessity of fault detection varies depending on the function and the regulations of the country.
In conclusion, the significance of automotive lighting systems for safety cannot be emphasized enough. In ensuring safe navigation and communication on the roads, they play a critical role. For every road user, it is crucial to prioritize proper maintenance, compliance with regulations, and understanding of complexities inherent in these systems.
